![]() ![]() This video shows you how to change the daytime running lights in your 2008 X3. Since the daytime running lights are on whenever you are driving your X3, they are often the first bulbs to burn out. Some BMW models have a slot where you can insert the key for a manual start or press the key against the Stop/Start button. Daytime running lights, sometimes referred to as DRLs or DTRs, are lights that switch on automatically when your 2008 BMW X3 is turned on and in drive. If your BMW has a Start/Stop button, you need to hold the key next to the steering column where you see a small key symbol. If that is the case, your BMW will not recognize the comfort access key.Ī temporary solution would be to start the car by inserting the key into the key slot, pressing the start button with the keyfob, or placing the keyfob next to the steering column while pressing start. If you have comfort access, the batteries may be dead. Even if the key starts to work again, you shouldn’t rely on it as it may stop working at any time. I found this forum and asked them to replace the front ride height level sensor, and problem solved. The garage replaced the alternator but this did nothing. The turn signals and bright lights would randomly turn on and remain. Let the BMW key fob dry for a few hours and try again. My dash lights were flickering like an electrical short. If your BMW key fob got wet because you washed it or let it out in the rain, it could fail to communicate with your BMW. If you’re experiencing this issue, a professional should inspect your BMW to diagnose the root cause and get your vehicle back up and running. Local radio waves can also interfere with key and car communication, resulting in the key symbol appearing on the dashboard. Your battery could have a dead cell also. Water in the key fob can cause damage to the electronics and result in a key symbol on the dashboard. (Edited) From searching the threads here you have to change both.Low battery voltage can prevent the key from communicating with the car, and electrical interference can cause the key and car to lose communication. If the comfort access is not working, the car will not detect the key, and the engine will not start. A damaged key fob can prevent the car from recognizing the key and prevent the engine from starting. A defective BMW key, comfort access not working, low battery voltage, electrical interference, water in the BMW key fob, and local radio waves can all cause this issue. Car or Instrument Cluster doesn’t turn onĪ BMW with a key symbol on the dashboard can be a frustrating experience but don’t worry several common causes can easily be fixed.Yellow key warning light on the instrument cluster.This can be due to the key being physically removed from the car or a problem with comfort access. If BMW yellow key warning light displays when you are driving, it is because the car stopped recognizing the key in the cabin. This problem is because BMW does not recognize the key, which could be due to several reasons. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |